XJ – Rear 4 Link Kit

Description

Notes before purchase: This is a weld on suspension kit! Exhaust modifications are necessary for the skid plate and rear 4 link kit. Does not include coil spring perches, but those will be available separately very soon. All components come unpainted.

This is the complete rear 4 link crossmember for our complete XJ suspension system. It is a 3 piece crossmember built out of 3/16″ steel with removeable center section for simple future transmission/transfer case removal and service. It does have a bracket that locates off an original bolt hole for accurate crossmember placement, but is intended to be welded for ultimate reliability.

The bare crossmember does not come with the suspension links, but those can be added via the other product options in either DIY or prebuilt configurations. LCAs are made from highly bend resistant 2×2 .250″ square steel tubing, uppers are 1.5″ .250 DOM tubing. Paired with 1.25″ lower and .875″ upper heat treated chromoly heim joints. Prebuilt links are designed for 0-2″ stretch, DIY links have enough tubing length for up to 6″ of stretch for the customer to decide

(All necessary hardware is included with each option)

Please use our contact form if you have any questions about our products!

Bare Crossmember Includes: Rear crossmember and all hardware for that crossmember (no link hardware)

Bare Crossmember – with Axle Brackets Includes: Rear crossmember, rear axle truss, upper control arm brackets, lower control arm brackets, and all hardware for that crossmember (no link hardware)

with Prebuilt Links Includes: Rear crossmember, rear axle truss, upper control arm brackets, lower control arm brackets, and all hardware for that crossmember along with all necessary tubing, heim joints, tube inserts, jam nuts, misalignment spacers, and link hardware. The links come prewelded designed for 0.5″-2″ stretch, so they just require assembly.

with DIY Links Includes: Rear crossmember, rear axle truss, upper control arm brackets, lower control arm brackets, and all hardware for that crossmember along with all necessary tubing (long enough for up to 6″ of stretch, cut to desired length, heim joints, tube inserts, jam nuts, misalignment spacers, and link hardware to weld links together yourself.