XJ – Front 3 Link Kit

Description

Notes before purchase: This is a weld on suspension kit! Exhaust modifications are necessary if you decide to run a passenger side upper link (drivers side upper links have no clearance issue). All components come unpainted.

This is the complete front 3/4 link crossmember for our suspension system. It is a 3 piece crossmember built out of 3/16″ steel with removeable center section for simple future transmission removal and service. It does bolt to the original crossmember mounting locations, but is intended to be welded for ultimate reliability.  Note: The lower control arm mounts on the frame must be cut off for this kit.

The bare crossmember does not come with the suspension links, but those can be added via the product options in either DIY or prebuilt configurations. LCAs are made from highly bend resistant 2×2 .250″ square steel tubing, and the upper is 1.5″ .250 DOM tubing. Paired with 1.25″ lower and .875″ upper heat treated chromoly heims. Prebuilt links are designed for 0-2″ stretch, DIY links have enough tubing length for up to 6″ of stretch for the customer to decide

(All necessary hardware is included with each option)

Please use our contact form if you have any questions about our products!

Bare Crossmember Includes: Front crossmember, skid plate, and all hardware for that crossmember (no link hardware)

with Prebuilt Links Includes: Front crossmember and hardware along with all necessary tubing, heim joints, tube inserts, jam nuts, misalignment spacers, and link hardware. The links come prewelded designed for 0.5″-2″ stretch, so they just require assembly.

with DIY Links Includes: Front crossmember and hardware along with all necessary tubing (long enough for up to 6″ of stretch, cut to desired length, heim joints, tube inserts, jam nuts, misalignment spacers, and link hardware to weld links together yourself.